ADAX Clea. Norwegian Design since 1948.

The Adax Clea WiFi combines state of the art heating technology with minimalist Norwegian design. The result is one of the most stylish portable electric heaters available. The low profile Clea is 222mm height (excluding the legs) and has a slimline, unobtrusive depth. The reduced height makes it suitable for conservatories, under large windows, bay and skirting areas. Available in a white or black glass finish, it is perfect for a wide range of interiors.

Adax are specialists in high quality, energy-efficient electric heating. All Adax electric panel heaters are manufactured in Europe to the highest quality standards.

The Adax Clea WiFi differs from other free standing convector radiators with its glass front panel. It has a modern design aesthetic that looks great in contemporary and traditional decors. With a splash proof IPX4 rating, the Clea can also be used in bathrooms (fused spur connection required). There is a choice of 600w, 800w & 1000w power outputs, and a single unit can heat small – medium room sizes. Additional portable heaters can be added for larger spaces according to requirements.

Included in the design are energy-saving features which make the heater fully ERP Lot 20 compliant. These features include WiFi control, 24 hour 7 day timer, voice control (Google Home & Alexa), digital thermostat, open window detection and adaptive start.  Consequently the Clea is more economic and efficient to run (up to 20% less than a basic electric heater). The safety features include an anti-tamper lock and overheat protection.

With WiFi connectivity, you control your heating from anywhere in the world using the Adax WiFi App. The App is free for smart phones and tablets. Gone are the days of leaving heating on, or come home to a cold home again! The heater connects directly with the WiFi router. You don’t need to buy any expensive hubs or gateways, everything is built in.

The Clea WiFi is easy to set up. A UK plug is fitted to the power cable, which is 1.2m in length and comes out of the rear right hand side of the heater.  You simply attach the leg brackets, then plug-in the electric heater to the nearest socket and go.

The Adax Clea WiFi is an award-winning portable convector heater due to its exceptional design, high build-quality and reliability. It is backed by a market-leading 5 year warranty which covers the panel work and electronics. For comparison, most portable heaters will only come with a 1 or 2 year warranty on the electronics.

---

Smart WiFi

The Clea connects directly to your router’s WiFi. By using your phone / tablet to pair the heater and WiFi together, no additional parts are needed. Simply plug the heater in and pair directly with your WiFi. Then you are ready to control your heater from anywhere. Never leave the heating on, or come home to a cold house again.

Discrete Styling

The slim, flat design helps to reduce the depth of the heater. With minimalist styling, the Clea is suited to both modern and classic interiors.

Time and Temperature Control

The Clea features a 24 hour / 7 day timer with as many on/off times and temperatures as you desire. The additional “away mode”  temporarily suspends the heater’s programme and set a temperature for a period of your choosing. This is ideal if your home is going to be empty for a week

Anti-Tamper Lock

Using the App, you can completely lock the heater so that it can’t be tampered with. This is ideal if there the heater is situated in public spaces or around children.

Zonal Control

If you have multiple heaters in a room, they can be grouped and controlled together. For example, ‘living room’ or ‘conservatory’ zones can be set up. Through zonal control you can group the heating in different areas of your home in a quick and intuitive way.

Lot 20 compliant

This heater is fully complaint with 2018 ERP Lot 20 regulations, utilising energy-saving features such as adaptive start and open window detection. This is ideal for landlords looking to reduce their house’s UPC rating or anyone looking for a energy-efficient heater.

---

Norwegian Design. Global Control.

You can use the app over WiFi or mobile internet, so no matter where you are your heating is accessible. The App’s features and modes allow you to tailor the heating around your needs.

With the App, you can turn on the heater’s energy saving modes and reduce wasted electricity. These include: ‘Open window’ mode which will temporarily switch the heater off if temperature rapidly decreases. And ‘Adaptive start’, which is an intelligent-learning programme, calculating the optimum time to start warming the room up. The Adax WiFi App also integrates with Google Home and Amazon Alexa, so you can control the heating with your voice and integrate with other smart appliances.

The Adax Clea’s thermostat can also be operated manually via the control panel. If the WiFi goes offline, you won’t be left in the cold.

The App’s Zone feature lets you control each room independently. Letting you select which rooms are warm throughout the day. Preventing you from needlessly wasting money heating the whole house!

• Control all your heaters in multiple locations, from anywhere
• Several pre programmed heating schedules and the option to programme custom heating schedules
• Pre-defined modes Home (comfort), Sleep (reduced) and Away (anti-frost ). The temperature for these modes can be altered to your preference.
• Quick and easy adjustments can be made in case you from your routine
• Control your heaters independently or by in a group. So that you can have a room by room program
• Open window detection, adaptive start, thermostat control. (all can be turned on/off in the App)
• The Adax App is a free download, available in Apple & Android stores

---

Modern technology and efficiency.

The Clea’s sleek design creates a clean aesthetic from all angles. The controls are user friendly, allowing you to easily change the temperature with a push of a button.

To keep your room temperature comfortable, the Clea uses a digital thermostat. This will precisely monitor the room and actively respond to changes in temperature, switching the heater on and off when its needed. This saves electricity and reduces running costs.

Adax’s X-fin heating element uses natural convection to heat the room. The heater has no moving parts and is silent when heating. The aluminium element in the base of the unit warms air, which flows into the bottom and out of the top vent, circulating evenly by convection throughout the room. There is no fan, so dust and particles are not blown around the room. By maintaining the air quality it is well suited for people with allergies.

The heater has an IPX4 splash proof rating, which means it is safe for use in bathrooms and wet rooms. (please contact us for further advice about the suitable bathroom zones for this heater)

---

Smart, Sleek, Simple Heating

Adax is a long-established manufacturer of heaters, founded in 1948. Their products are still made in Europe and adhere to the highest quality standards. This has made Adax a favourite of building developers and contractors, with large quantities being installed in properties and developments across the UK and Europe.

Most heaters on the market offer a seemingly long guarantee but only cover the electronics for 2 years. However, Adax offer an intrinsic 5 year guarantee covering body work and electronics as well as meeting all necessary EU and UK approvals for safety.

The heater is supplied with a UK plug fitted, portable leg brackets and a wall mounting kit (including the wall bracket). Also supplied in the box is a mounting template and instructions. The heater is easy to install if you have basic DIY skills.

If you wish to hard wire the heater, the plug can be cut without affecting the guarantee.

If you have any questions about this product, please feel free to contact one of our team!

The Adax Clea WiFi can also be wall mounted using the additional brackets and mounting guide, which is located on the inside of the box.

Product Specifications